Contents
 
   

Motorcycles For Sale

 <

Parts, Projects For Sale

 <

Wanted Ads

 <
 <
 <
   

   Services
 
   
Showcase
 <
Motorcycle Tours
 <
Parts Suppliers
 <
Insurance
 <
Accessories
 <
 <
Schools
 <
Transportation
 <
 
  
 
   

FRAUD & SCAMS
Recognize It

 


Current selection of Parts for Sale
American
Japanese
British
Italian
German
Custom
Page 1
         Prices are in Canadian dollars unless stated otherwise

Ad#29/08/10 P0031  
Benelli Montgomery Wards 260 Mojave cylinder head and valve cover. Should fit the Benelli 250.  Also the Mojave 360 if you have the longer pushrods.
The valves and seats are good and there are no cracks or broken fins. $75
Sarnia   519-337-9532  bentwheel@cogeco.ca

Ad#24/08/10 P0030  
1967 TRIUMPH TR6 650 ENGINE PARTS
-crankshaft  -matching cases (TR6)  (needs minor repair at one joint surface)- barrels (standard bore, fins good)   -Bonnie head (bare-no valves or guides; fins good) -tach drive -intake rocker assembly 
-outer & inner gearbox cover w/parts  -oil pipe junction  -alternator   
-most clutch parts. Willing to part out but prefer to sell the lot for $350. Email for pictures & details. email: jbakker21@hotmail.com

Ad#18/08/10 P0029
1970's Honda CD 175 twin (not seized, no ownership) $200, --- 1981 Yamaha XS400 twin Ownership $200, ---- Honda Magna parts(carbs, engine, etc;) ----- Vespa Bodies and engines $100 for the pair. email: normandbirch@hotmail.com

Ad#05/08/10 P0028  
 
1970's Honda CB 750 "GO FAST" parts. I have a bunch of parts that came off a 1970's CB 750. Heres the list.
twin weber carb set up $500--- dyna coils $125
dyna ignition $50---front & rear twin sprocket set NOS $200
Open to offers-trades.Thanks 519-802-9945 barney@hawcoproducts.com

Ad#31/07/10 P0027  
 

XS 650 Yamaha Parts

Parting out 4 xs 650's various years. All with ownerships. Please don't ask what I have, too much to list, just tell me what you need.  Located in Lindsay, On. Email: halanddebbie@sympatico.ca


Ad#18/07/10 P0026  
I have a new old stock Norton High Rider seat.  It is the longer version.  Repro seats are not available for the High Rider and standard Commando repro seats are $300 for UK made ones.  Here is a rare opportunity to complete or renew your Hi Rider with the correct NOS seat. 
Yours for $300

Ad#12/07/10 P0025  
FOR SALE > 69/70 HONDA CB750 & 41 INDIAN CHIEF [or may buy your parts] AS IS 416-996-5940 Toronto email:gschwarzmc@sympatico.ca

Ad#05/07/10 P0024  
 

Hannigan Sport Fairing Complete with lowers. Not new.  Most interesting trade gets it! Mississauga Ont. Email rickw@millergroup.ca


Ad#03/07/10 P0023 SOLD

Ad#26/06/10 P0022  
1934 Harley-Davidson 74 cubic inch (1200 cc) VL engine, transmission, clutch, and frame.  Clean original engine numbers, very nice unmolested frame.  Included are new pistons, new valves, valve guides, gaskets, and much more.  A good start to a restoration, bobber, etc. or use for your existing VL project.  $2,300.00 obo.  Email: rkjk@sympatico.ca  phone 613 432-7308.  Renfrew, Ontario.

Ad#01/06/10 P0021  

1977 Honda Elsinore CR125 M This bike runs and would make a great vintage rebuild project or a great vintage race bike.  The tank has a dent that can likely be popped out, needs rear shocks, there is rust on the pipe and silencer and other components. With some work this bike could be a fun bike to rip up the dirt and with a lot of work it could be a nice show piece. If interested please email me at dtbird@hotmail.com


Ad#30/05/10 P0020  
FOR SALE: 1981 Honda 400 CM Automatic, project, needs finishing, did have it running and have an extra set of carbs. Will need correct seat, front rim and tune up. Located in Battleford, Saskatchewan Asking $500.00 E-mail Barry at bgrantnb@sasktel.net

Ad#19/05/10 P0019  
  1970 HONDA SS125, SHOP AND SERV. MANUAL $250 PLEASE CALL 613-386-5014 Email:Tim.J.Whalen@invista.com

Ad#18/05/10 P0018  
No Pic
Honda Misc Parts 1987 CBR 600 wheels w front discs $150
1975 CB 550 rear fender with lights ,excellent cond. $50
CB 750 70's guages fair condition $40
1975 CB 500T gas tank ,good cond, orig brown $100
613-253-3456 Email: teamkz@rogers.com

Ad#18/05/10 P0017  
No Pic 1978 GS 750 Race or mod. Street project. Over $5000 invested for the intent of road racing. Motor built by Litner/bush. Needs approx 15-20 to complete .Comes with ownership $2500 OBO. for more details: Steve 613-253-3456 Email:teamkz@rogers.com

Ad#08/05/10 P0016  
2 1980-84 era Vespa Bodies and engines
No ownership or wheels
$250 for the Pair OBO
Trenton, ON
613-965-6882
leave a Message

Ad#08/05/10 P0015  
1972 Kawasaki 500 H-1.4330 original miles. Bike has taken apart for restoration.Original Dunlops in good shape. Also 74 H1-E, chrome plated engine cases, 2 sets of stock exhaust, lots of extra parts,. both bikes titled. $3200 takes all. Steve at 705-752-3938 or email:courchesne.as@sympatico.ca

Ad#01/05/10 P0014  
  FOR SALE: 1)The following for BSA twins:
-set of 1969 A65 Lightning cases, matching with complete gearbox -$250
-1969 A50 bare cases, matching, cleaned-$150
-A50 crankshaft -$50; -A65 inner timing cover -$20
-A65 Lightning cylinder head w/Valves -$100
-oil pipe ass. -$15; -right fork ear -$10
-left riders peg -$10; -rear fender frame loop-$20
-A65 swingarm -$50; -A65 battery box -$20
-A7 timing cover -$20; A7 primary cover -$20
-other small BSA A65 bits available; what do you need?
2)1976 licence plate -$20
3) Norton rear wheel assembly (18") w/3 stud bolt on brake hub attachment. Complete assembly minus axle & 3 nuts; rim rusty. -$100.
8) John Tickle NOS clamp on headlamp brackets for cafe bike. Chrome, 34mm approx. fits BSA, Triumph, etc- $25
Email for pictures. Prices negotiable, especially on volume buys.
John Bakker, Midland, On. 705-526-4500 jbakker21@hotmail.com
Ad#29/04/10 P0013  
  FOR SALE:
1) Set of 4 original Honda 500 Four exhaust. Not concours but useable or restorable (small scrapes, 2 patches) - $150.
2)1976 licence plate -$20
3) Honda CB 350 twin swingarm (no bushings) -$15
4) Assortment of Honda CB 350 Four parts (mostly engine). What do you need?
5) Yamaha 19" front mag wheel ('70s). No disc. -$15
6) John Tickle NOS clamp on headlamp brackets for cafe bike. Chrome, 34mm approx. fits BSA, Triumph, etc- $25
Email for pictures.
John Bakker, Midland, On. 705-526-4500 jbakker21@hotmail.com

Ad#29/04/10 P0012 Ad Clossed

Ad#29/04/10 P0011  

1952 BSA A7 Star Twin 500cc with a plunger frame, which is correct for the year. In dry storage over 40 years. Engine turns over. Frame & stock front end are chromed. Bike has been left mostly stock and is 90% there. Would make a nice bobber custom or restoration project. It is a rolling chassis with engine/gearbox unit together and installed. Asking price of $1500. Located in Midland , On. Phone: 705-526-4500
For pictures email: jbakker21@hotmail.com


Ad#16/04/10 P0010

Ad#05/04/10 P0009
I have a pair of NEW in the box Dyna (5.0 OHM) coils for Harley-Davidson, asking $65.00. PH 250-542-0946

Ad#14/03/10 P0008
cleaning out  basement -I have a Suzuki sp 370 engine, frame ,wheels -needs cam and carb-also engine pieces for a Honda cb500 twin-cylinder head ,crank,crankcase,barrels -no trans gears -all parts FREE to whoever wants to pick up -located in edmonton area----------call 780-487-8748-or e-mail w.gb.2@hotmail.com

Ad#22/02/10 P0007

Parts for a 1985 FZ750, fits 1985-1988. No body work.  
Wheels, black: $180 for 2. Forks: $100. Headlight: $80. Full gauges: $80 54, 000 kms. Front birdcage: $40. Radiator: $70. Triples: $40. Frame: $100. Tank: $40. Wiring Harness: $80. CDI and fusebox: $80
Swingarm and shock linkage: $80. Engine: $150, never heard it running.
Carbs: $80. Tail light: $20. Handlebars: $20. Front brake assembly: $ 75. Rear Brake assembly $30.  Prices are negotiable, will reduce prices if you buy more than three things. Located in Kitchener. Call 519-503-8933.


Ad#21/02/10 P0006  
No Photo
I have a near mint assembly manual , the one you get to assemble bike from crate, for a 1973 Yamaha rd250 and rd350.
it has just a slight yellowing on one edge great to compliment a restoration
Make me an offer

Ad#17/02/10 P0005  
1990 YSR(50) comes with a 185cc four stroke drive line professionally installed into frame,  comes with a spare 185cc engine that needs to be put into the frame, great condition tires. Excellent project, it needs spare engine bolted in, an exhaust and top fairing. Asking $750 firm.

Ad#16/02/10 P0004  
1982 Yamaha RD350 LC,. Frame, swingarm, and other parts sand blasted and professionally painted, comes with basically everything to assemble. Including original bore engine in good condition, some new nuts, bolts  and washers from Yamaha, brand new gauge cover, many spares also available. Asking $1200 obo

Ad#31/01/10 P0003  
1978 GS Superbike project. Over $5000 invested in aftermarket parts and labour. The motor was build by Litner&Bush back in 1988 and has never been fired. The bike was being built as either a race bike or modified street bike.We have all the receipts. Price $2750. For info. phone 613-253-3456 email: teamkz@rogers.com

Ad#14/01/10 P0002  
Mikuni 33mm Smoothbores 
set up for the Kawasaki KZ 
series 650-1100 or
Suzuki GS 750-1100.
Mikuni  Model: VM33. $450.00
Carleton Place, phone 613-253-3456
email: teamkz@rogers.com
                          

Ad# 02/01/10 P0001 pamarti7@hotmail.com
GS500e frame and fork . Both true and clean with Qc. title . Tail / side , tank and seat include . Same steel frame from '89 to almost now . Steel mean easily weldable for modification if you need. pamarti7@hotmail.com

 

Thanks to the more than 1,000,000 viewers

info@classicbikeexchange.com


Page 1
next page

The Canadian Classic Bike Exchange
Entire contents Copyright © 2005 -2009 All rights reserved.